Transition Strip
The Premier Transition Strip is a functional door bar which will give you an attractive ramp between two hard floors that have a height between 10mm and 20mm (Don’t worry if you have less of a height change as our Floor Transition Strips Uneven are best for lower heights, and our Self Adhesive Door Threshold Strips for level floors are unbeatable)
This solid metal, heavy-duty Transition Strip is hand finished in 10 stunning colours, so if you are looking for that high-end finish to your floors, these are the trims for you!
These trims are also very easy to fit because they are fitted with very strong self-adhesive tape, there’s no need to drill, just peel and stick
The list of possible uses is endless with this Transition Strip
For instance:
- Laminate to laminate
- Laminate to vinyl
- Laminate to LVT
- Laminate to engineered Flooring
- Vinyl to vinyl
- Engineered flooring to engineered flooring
- Stone to LVT
- Laminate to Stone
- Real wood to Stone
- Real wood to LVT
- Stone to vinyl
- Stone to stone
In fact, any combination of the above is possible with this trim
- Our standard choice of standard finishes is:Antique Brass, Antique Bronze,Brass, Satin Brass.
- Or choose from our Specialised finishes:Brushed Chrome,Chrome,Pewter,Polished Nickel, Satin Nickel and Black
- Choice of length:90cm (36″), 180 (71″) and 270cm (106″)
- Choice of height: 10mm, 12mm, 14mm, 16mm, 20mm
Once you have decided which finish, length and height you require, please make your selections from the drop-down menu above.
Other Size Options
As mentioned, in addition to this, we have trims for smaller height changes (2-9mm) try our Floor Transition Strips Uneven
And for level transitions use our top seller, the Self Adhesive Door Threshold Strips
Ordering And Delivery
Spend £75 for free delivery
For orders under £75 our delivery charge is £9.98, this is due to the fact that we use thick boxes and tubes to secure your trims, we also attached a timber batten to the longer parcels to help prevent them from damage, these precautions result in a slightly higher shipping price.
Deliveryis normally 3-5 working days, however it can take 7-10 working day during busy periods
If the delivery date is critical, please contact us for an estimated delivery date.
Care and Maintenance
Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Satin Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Antique Bronze
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Antique Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Pewter
Remove spills immediately to limit corrosion with white vinegar. Use a polishing cloth occasionally, such as HG copper shine cloth, available from most DIY stores. Avoid contact with floor coverings.
Chrome, Brushed Chrome, Satin Nickel, Polished Nickel and Black
No maintenance required.
2 reviews for Transition Strip
Powered by
5.0
Based on 2 reviews
| 5 star | 100 | 100% |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
-
Rated 5 out of 5
Laurence B. (verified owner) –
Expensive but does result in a great finish. Easy to install.
(1) (0)
-
Rated 5 out of 5
Gabriel N. (verified owner) –
Lovely trims, they look great and the fitter commented on their quality. Not the cheapest, but much stronger and nicer than other options. Highly recommended!
(0) (0)
Only logged in customers who have purchased this product may leave a review.
Delivery
Our door bars are hand finished to order, therefore production and delivery normally takes 3-5 working days, but can take 7-10 working days during busy periods.
Courier charges
Please note: Our trims are heavy and well packaged, plus the parcels are long, this means we are unable to send the trims with the cheaper carriers.
UK Mainland £10.74
Northern Ireland £24
Channel Islands £42
Highlands £30
Isle of White £18
Isle of Man £42
Spend £75 and delivery is free (UK Mainland only)
Please check deliveries for damage and if damage is visible please ensure goods are signed for as damaged or refused if damage is severe.
We can deliver the 90 cm and 180 cm trims Worldwide, please e-mail us for a postage quotation
Returns
Returns are excepted within 30 days of delivery only, any returns over 30 days will not be accepted. (Returns must be tracked in case proof of return is required)
**IMPORTANT** When returning trims in their original packaging, please ensure that you put extra packaging tape around the end caps of the tubes to prevent the caps from coming off and trims sliding out. We have had many instances where this has happened, we are unable to claim for this from the carrier, and we are unable to refund trims which do not make it back to us
The buyer is liable for the return postage charges, unless the return is due to damage or the wrong goods have been sent
Returns charges can be expensive when dealing with long and heavy flooring trims, we suggest getting advice from our flooring experts or ordering a free sample before purchase if you are unsure of colours and sizes
Return address: (please include original delivery note)
Stairrods UK
Returns
6 Park Road North Ind Est
Blackhill
Consett
DH8 5UN
Faulty/Damaged Goods
Customers must check deliveries for damage, if damage is clear and substantial, delivery should be refused.
If damage is discovered after an order has been unpacked images should be taken and immediately sent to sales@qualitycarpettrims.co.uk
Faulty or damaged goods should be reported within 48 hours of delivery.
Faulty or damaged goods will either be replaced or refunded as agreed
Grace Matthews trading as Quality Carpet Trims will pay any postage costs related to returning or replacing faulty or damaged goods.
In some cases we may kindly ask you to dispose of damaged or faulty goods
If you have any additional questions or would like to discuss faulty or damaged goods, feel free to contact us 01383 669190 or by email, sales@qualitycarpettrims.co.uk
